Tools
Free tools that run in your browser. They give preliminary, draft or reference output for an expert to review; none gives an approval or a certificate.
Preliminary orientation · not an approval
CE Preliminary Check
Answer questions about your craft and see, with sources, which route may apply and what is missing.
- Preliminary orientation only, based on your own answers. It is not a conformity assessment, a certificate or an approval.
- The check never determines a design category, a load, a number of persons, an exemption or a notified body.
Ruleset 2026.10.29-4
Draft output for review · not a final plate
Builder’s Plate Generator
Prepare a draft plate layout from your own data, with a live preview and exact-size draft files.
- Draft output only. Every preview and file is marked DRAFT and is not for affixing to a craft.
- Values come from your documentation; the tool never calculates a load, a number of persons or a design category.
Template 2026.11.01-3
Reference · not a conformity assessment
Essential Requirements Guide
Annex I of the directive point by point, with the harmonised standards cited for each requirement and a filter for your craft.
- Not a checklist that proves conformity: the manufacturer applies the standards or an equivalent solution and a notified body assesses where the module requires it.
- Annex II components and Annex III partly completed craft are not covered here.
OJ list as consolidated 13.03.2026